Mechanical Steel Jack#3

Attention
●Do not exceed the rated capacity. Overload is forbidden.
●Before operation, please check the flexibility of the Ratchet
Pawls(5),(6)
●Please be sure the jack is on complete balance when operating. Do
not put it on beveled, arc or uneven surfaces. The jack must be
placed on hard plain grounds.
●Before lifting, please be sure the Support Stand (4) (3) supports the
goods completely.
●When several jacks are used at the same time, please be sure of the
same lift or down. The whole operation course should be directed.
●It's forbidden putting any parts of the body under the lifted goods.
●If working force is abnormal in operation, please shop working
immediately to inspect all related transmit components.
●Lubricate pa rts applied regula rly.
●The Upper Support Stand (3) should be on bottom position when
the jack is not used.

●All jacks are tested with 25% overload
●Equipped with fixed claw
●Folding handle

Operation Guide
Put the steel jack on even places. Then place the
goods on the Lower Support Stand(4)or the Upper
Support Stand(3). Shake the Level(2) clockwise to lift
the goods, vice verse, the goods are lowered down.
(1) Base
(2)Level
(3)Upper Support Stand
(4)Lower Support Stand
(5)Upper Ratchet Pawl
(6)Lower Ratchet Pawl
(7)Axle Ring